Specifikace udávané výrobcem - upgrade: biosu, download ovladačů, download pomůcek, manuál zde

Jaké jádro zrovna Ubuntu Feisty Fawn (FF) používá (zapnuté aktualizace)?
2.6.20-16-generic
Jaký grafický ovladač zrovna FF používá?
8.34.8
výpis z terminálu po zadáni příkazů "lspci"
johnnys@narcis:~$ lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: ATI Technologies Inc M56P [Radeon Mobility X1600] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 05:04.2 Generic system peripheral [0805]: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:09.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01) johnnys@narcis:~$
výpis z terminálu po zadáni příkazů "dmesg"
johnnys@narcis:~$ dmesg [ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fed0000 end: 000000003ffd0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003ffd0000 size: 000000000000e000 end: 000000003ffde000 type: 3 [ 0.000000] copy_e820_map() start: 000000003ffde000 size: 0000000000022000 end: 0000000040000000 type: 4 [ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262096 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262096 [ 0.000000] On node 0 totalpages: 262096 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32465 pages, LIFO batch:7 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP (v000 MSI ) @ 0x000f9700 [ 0.000000] ACPI: RSDT (v001 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x3ffd0000 [ 0.000000] ACPI: FADT (v002 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x3ffd0200 [ 0.000000] ACPI: MADT (v001 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x3ffd0390 [ 0.000000] ACPI: MCFG (v001 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x3ffd03f0 [ 0.000000] ACPI: SSDT (v001 ATI ATIPATCH 0x00000001 INTL 0x02002026) @ 0x3ffd3eb0 [ 0.000000] ACPI: OEMB (v001 MSI 1039 0x05102006 MSFT 0x00000097) @ 0x3ffde040 [ 0.000000] ACPI: DSDT (v001 MSI 1039 0x05102006 INTL 0x02002026) @ 0x00000000 [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) [ 0.000000] Detected 1989.895 MHz processor. [ 22.350839] Built 1 zonelists. Total pages: 260049 [ 22.350842] Kernel command line: root=UUID=9eccc224-29dc-4745-8765-b1f6031168c1 ro quiet splash locale=cs_CZ [ 22.350973] mapped APIC to ffffd000 (fee00000) [ 22.350975] mapped IOAPIC to ffffc000 (fec00000) [ 22.350978] Enabling fast FPU save and restore... done. [ 22.350981] Enabling unmasked SIMD FPU exception support... done. [ 22.350990] Initializing CPU#0 [ 22.351053] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 22.352357] Console: colour VGA+ 80x25 [ 22.352903] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.353353] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.373609] Memory: 1028196k/1048384k available (1992k kernel code, 19456k reserved, 900k data, 328k init, 130880k highmem) [ 22.373619] virtual kernel memory layout: [ 22.373620] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 22.373621] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.373622] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.373623] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 22.373624] .init : 0xc03d9000 - 0xc042b000 ( 328 kB) [ 22.373626] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB) [ 22.373627] .text : 0xc0100000 - 0xc02f2374 (1992 kB) [ 22.373630] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.450946] Calibrating delay using timer specific routine.. 3983.88 BogoMIPS (lpj=7967779) [ 22.450982] Security Framework v1.0.0 initialized [ 22.450989] SELinux: Disabled at boot. [ 22.451002] Mount-cache hash table entries: 512 [ 22.451123] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 [ 22.451132] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.451134] CPU: L2 Cache: 1024K (64 bytes/line) [ 22.451136] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 [ 22.451148] Compat vDSO mapped to ffffe000. [ 22.451153] Remapping vsyscall page to ffffe000 [ 22.451162] Checking 'hlt' instruction... OK. [ 22.467063] SMP alternatives: switching to UP code [ 22.467317] Freeing SMP alternatives: 11k freed [ 22.467509] Early unpacking initramfs... done [ 22.743903] ACPI: Core revision 20060707 [ 22.744310] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT. [ 22.747440] CPU0: AMD Turion(tm) 64 Mobile Technology MT-37 stepping 02 [ 22.747457] Total of 1 processors activated (3983.88 BogoMIPS). [ 22.747625] ENABLING IO-APIC IRQs [ 22.747810] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 22.894466] Brought up 1 CPUs [ 22.894631] Booting paravirtualized kernel on bare hardware [ 22.894708] Time: 17:03:26 Date: 05/17/107 [ 22.894729] NET: Registered protocol family 16 [ 22.894787] EISA bus registered [ 22.894790] ACPI: bus type pci registered [ 22.895455] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6 [ 22.895457] PCI: Using configuration type 1 [ 22.895459] Setting up standard PCI resources [ 25.100528] ACPI: Interpreter enabled [ 25.100530] ACPI: Using IOAPIC for interrupt routing [ 25.101011] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.101015] PCI: Probing PCI hardware (bus 00) [ 25.101932] Boot video device is 0000:01:00.0 [ 25.102678] PCI: Transparent bridge - 0000:00:14.4 [ 25.102745] PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#06) (try 'pci=assign-busses') [ 25.102748] Please report the result to linux-kernel to fix this permanently [ 25.102782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.113122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 25.113393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] [ 25.113694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] [ 25.119285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 25.121526] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 25.121763] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 25.121999] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 25.122236] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 25.122474] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 25.122712] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. [ 25.122945] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 25.123182] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 25.123285] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.123291] pnp: PnP ACPI init [ 25.125253] pnp: PnP ACPI: found 11 devices [ 25.125257] PnPBIOS: Disabled by ACPI PNP [ 25.125288] PCI: Using ACPI for IRQ routing [ 25.125291] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.143978] NET: Registered protocol family 8 [ 25.143980] NET: Registered protocol family 20 [ 25.144722] PCI: Bridge: 0000:00:02.0 [ 25.144724] IO window: 8000-8fff [ 25.144727] MEM window: fd800000-fd8fffff [ 25.144730] PREFETCH window: bbf00000-dbefffff [ 25.144733] PCI: Bridge: 0000:00:04.0 [ 25.144735] IO window: 9000-9fff [ 25.144737] MEM window: fd900000-fe0fffff [ 25.144740] PREFETCH window: dbf00000-ddefffff [ 25.144743] PCI: Bridge: 0000:00:05.0 [ 25.144745] IO window: a000-afff [ 25.144747] MEM window: fe100000-fe1fffff [ 25.144750] PREFETCH window: disabled. [ 25.144759] PCI: Bus 6, cardbus bridge: 0000:05:04.0 [ 25.144761] IO window: 0000b000-0000b0ff [ 25.144766] IO window: 0000b400-0000b4ff [ 25.144772] PREFETCH window: 54000000-57ffffff [ 25.144777] MEM window: 58000000-5bffffff [ 25.144783] PCI: Bridge: 0000:00:14.4 [ 25.144786] IO window: b000-bfff [ 25.144792] MEM window: fe200000-feafffff [ 25.144797] PREFETCH window: ddf00000-dfefffff [ 25.144810] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 25.144816] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 25.144823] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 25.144848] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 19 (level, low) -> IRQ 16 [ 25.144872] NET: Registered protocol family 2 [ 25.175937] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.176080] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 25.176938] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 25.177457] TCP: Hash tables configured (established 131072 bind 65536) [ 25.177459] TCP reno registered [ 25.187985] checking if image is initramfs... it is [ 25.734159] Freeing initrd memory: 6767k freed [ 25.734661] audit: initializing netlink socket (disabled) [ 25.734671] audit(1182099808.464:1): initialized [ 25.734722] highmem bounce pool size: 64 pages [ 25.734781] VFS: Disk quotas dquot_6.5.1 [ 25.734797] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.734836] io scheduler noop registered [ 25.734838] io scheduler anticipatory registered [ 25.734840] io scheduler deadline registered [ 25.734850] io scheduler cfq registered (default) [ 25.783358] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 25.783380] assign_interrupt_mode Found MSI capability [ 25.783382] Allocate Port Service[0000:00:02.0:pcie00] [ 25.783440] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 25.783461] assign_interrupt_mode Found MSI capability [ 25.783463] Allocate Port Service[0000:00:04.0:pcie00] [ 25.783518] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 25.783538] assign_interrupt_mode Found MSI capability [ 25.783540] Allocate Port Service[0000:00:05.0:pcie00] [ 25.783632] isapnp: Scanning for PnP cards... [ 26.137823] isapnp: No Plug & Play device found [ 26.156442] Real Time Clock Driver v1.12ac [ 26.156477] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 26.156976] mice: PS/2 mouse device common for all mice [ 26.157370] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 26.157534] input: Macintosh mouse button emulation as /class/input/input0 [ 26.157557] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 26.157561] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 26.157798] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 26.158609] i8042.c: Detected active multiplexing controller, rev 1.1. [ 26.158689] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 26.158692] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 26.158694] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 26.158697] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 26.158699] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 26.158780] EISA: Probing bus 0 at eisa.0 [ 26.158821] Cannot allocate resource for EISA slot 8 [ 26.158822] EISA: Detected 0 cards. [ 26.188864] TCP cubic registered [ 26.188872] NET: Registered protocol family 1 [ 26.188888] Using IPI No-Shortcut mode [ 26.188936] ACPI: (supports S0 S1 S3 S4 S5) [ 26.188975] Magic number: 11:592:87 [ 26.189348] Freeing unused kernel memory: 328k freed [ 26.190608] Time: tsc clocksource has been installed. [ 26.218804] input: AT Translated Set 2 keyboard as /class/input/input1 [ 27.399189] Capability LSM initialized [ 27.433278] ACPI: duty_cycle spans bit 4 [ 27.433295] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 27.433303] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707] [ 27.437581] ACPI: Thermal Zone [THRM] (54 C) [ 27.866658] usbcore: registered new interface driver usbfs [ 27.866675] usbcore: registered new interface driver hub [ 27.866691] usbcore: registered new device driver usb [ 27.867192] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 27.867220] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 16 [ 27.867231] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 27.867349] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 27.867368] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebff000 [ 27.924859] usb usb1: configuration #1 chosen from 1 choice [ 27.924880] hub 1-0:1.0: USB hub found [ 27.924892] hub 1-0:1.0: 4 ports detected [ 27.968590] ieee1394: Initialized config rom entry `ip1394' [ 28.028611] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 16 [ 28.028626] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 28.028648] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 28.028664] ohci_hcd 0000:00:13.1: irq 16, io mem 0xfebfe000 [ 28.088537] usb usb2: configuration #1 chosen from 1 choice [ 28.088562] hub 2-0:1.0: USB hub found [ 28.088574] hub 2-0:1.0: 4 ports detected [ 5.704000] Time: acpi_pm clocksource has been installed. [ 5.732000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 16 [ 5.732000] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 5.732000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 5.732000] ehci_hcd 0000:00:13.2: irq 16, io mem 0xfebfd000 [ 5.732000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.732000] usb usb3: configuration #1 chosen from 1 choice [ 5.732000] hub 3-0:1.0: USB hub found [ 5.732000] hub 3-0:1.0: 8 ports detected [ 5.836000] ACPI: PCI Interrupt 0000:05:04.4[A] -> GSI 19 (level, low) -> IRQ 16 [ 5.884000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[feafd000-feafd7ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 5.888000] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [ 5.888000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 5.888000] ATIIXP: chipset revision 128 [ 5.888000] ATIIXP: not 100% native mode: will probe irqs later [ 5.888000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio [ 5.888000] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio [ 5.888000] Probing IDE interface ide0... [ 6.176000] hda: FUJITSU MHV2100AH PL, ATA DISK drive [ 6.812000] usb 3-6: new high speed USB device using ehci_hcd and address 4 [ 6.848000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.928000] Probing IDE interface ide1... [ 6.956000] usb 3-6: configuration #1 chosen from 1 choice [ 6.956000] hub 3-6:1.0: USB hub found [ 6.956000] hub 3-6:1.0: 1 port detected [ 7.160000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc10000504f100] [ 7.364000] usb 1-1: new low speed USB device using ohci_hcd and address 3 [ 7.572000] usb 1-1: configuration #1 chosen from 1 choice [ 7.664000] hdc: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive [ 7.880000] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 8.000000] ide1 at 0x170-0x177,0x376 on irq 15 [ 8.008000] SCSI subsystem initialized [ 8.012000] libata version 2.20 loaded. [ 8.012000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 8.012000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 18 [ 8.012000] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 8.012000] eth0: RTL8168b/8111b at 0xf88a8000, 00:16:17:4f:d0:e4, IRQ 18 [ 8.028000] hda: max request size: 128KiB [ 8.036000] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) [ 8.040000] hda: cache flushes supported [ 8.040000] hda: hda1 hda2 <<6>usb 2-1: configuration #1 chosen from 1 choice [ 8.092000] hda5 hda6 hda7 hda8 > [ 8.156000] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 8.156000] Uniform CD-ROM driver Revision: 3.20 [ 8.288000] usb 3-6.1: new high speed USB device using ehci_hcd and address 5 [ 8.392000] usb 3-6.1: configuration #1 chosen from 1 choice [ 8.392000] usbcore: registered new interface driver hiddev [ 8.396000] input: Acrox USB & PS/2 Mouse as /class/input/input2 [ 8.396000] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:13.0-1 [ 8.400000] input: USB-compliant keyboard as /class/input/input3 [ 8.400000] input: USB HID v1.10 Keyboard [USB-compliant keyboard] on usb-0000:00:13.1-1 [ 8.408000] input: USB-compliant keyboard as /class/input/input4 [ 8.408000] input,hiddev96: USB HID v1.10 Mouse [USB-compliant keyboard] on usb-0000:00:13.1-1 [ 8.408000] usbcore: registered new interface driver usbhid [ 8.408000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 8.412000] usbcore: registered new interface driver libusual [ 8.416000] Initializing USB Mass Storage driver... [ 8.416000] scsi0 : SCSI emulation for USB Mass Storage devices [ 8.416000] usbcore: registered new interface driver usb-storage [ 8.416000] USB Mass Storage support registered. [ 8.416000] usb-storage: device found at 5 [ 8.416000] usb-storage: waiting for device to settle before scanning [ 8.640000] Attempting manual resume [ 8.640000] swsusp: Resume From Partition 3:6 [ 8.640000] PM: Checking swsusp image. [ 8.640000] PM: Resume from disk failed. [ 8.672000] kjournald starting. Commit interval 5 seconds [ 8.672000] EXT3-fs: mounted filesystem with ordered data mode. [ 13.416000] usb-storage: device scan complete [ 13.416000] scsi 0:0:0:0: Direct-Access USB 2.0 Flash Disk 1.00 PQ: 0 ANSI: 0 CCS [ 20.672000] r8169: eth0: link up [ 20.672000] r8169: eth0: link up [ 22.000000] NET: Registered protocol family 17 [ 22.100000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 22.104000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.288000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 22.496000] Linux agpgart interface v0.102 (c) Dave Jones [ 22.628000] Yenta: CardBus bridge found at 0000:05:04.0 [1462:0391] [ 22.628000] Yenta O2: res at 0x94/0xD4: 00/ea [ 22.628000] Yenta O2: enabling read prefetch/write burst [ 22.656000] sdhci: Secure Digital Host Controller Interface driver [ 22.656000] sdhci: Copyright(c) Pierre Ossman [ 22.756000] Yenta: ISA IRQ mask 0x0eb8, PCI irq 16 [ 22.756000] Socket status: 30000006 [ 22.756000] Yenta: Raising subordinate bus# of parent bus (#05) from #06 to #09 [ 22.756000] pcmcia: parent PCI bridge I/O window: 0xb000 - 0xbfff [ 22.756000] cs: IO port probe 0xb000-0xbfff: clean. [ 22.756000] pcmcia: parent PCI bridge Memory window: 0xfe200000 - 0xfeafffff [ 22.756000] pcmcia: parent PCI bridge Memory window: 0xddf00000 - 0xdfefffff [ 22.756000] sdhci: SDHCI controller found at 0000:05:04.2 [1217:7120] (rev 1) [ 22.756000] ACPI: PCI Interrupt 0000:05:04.2[A] -> GSI 19 (level, low) -> IRQ 16 [ 22.756000] sdhci:slot0: Unknown controller version (16). You may experience problems. [ 22.756000] mmc0: SDHCI at 0xfeaffc00 irq 16 PIO [ 23.040000] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 23.040000] rt2500 1.1.0 BETA4 2006/06/18 http://rt2x00.serialmonkey.com [ 23.460000] input: PC Speaker as /class/input/input5 [ 23.696000] SCSI device sda: 1015808 512-byte hdwr sectors (520 MB) [ 23.700000] sda: Write Protect is off [ 23.700000] sda: Mode Sense: 00 26 00 00 [ 23.700000] sda: assuming drive cache: write through [ 23.704000] SCSI device sda: 1015808 512-byte hdwr sectors (520 MB) [ 23.704000] sda: Write Protect is off [ 23.704000] sda: Mode Sense: 00 26 00 00 [ 23.704000] sda: assuming drive cache: write through [ 23.704000] sda: sda1 [ 23.744000] sd 0:0:0:0: Attached scsi removable disk sda [ 23.760000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 23.792000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 23.884000] cs: IO port probe 0x100-0x3af: clean. [ 23.884000] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x4d0-0x4d7 [ 23.888000] cs: IO port probe 0x820-0x8ff: excluding 0x830-0x837 [ 23.888000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf [ 23.888000] cs: IO port probe 0xa00-0xaff: clean. [ 23.968000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 24.060000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input6 [ 24.480000] fuse init (API version 7.8) [ 24.588000] lp: driver loaded but no devices found [ 24.812000] Adding 530104k swap on /dev/disk/by-uuid/7b462e82-4295-43be-8fe8-758d13f5fa05. Priority:-1 extents:1 across:530104k [ 25.016000] EXT3 FS on hda7, internal journal [ 25.144000] NET: Registered protocol family 10 [ 25.148000] lo: Disabled Privacy Extensions [ 31.184000] ACPI: AC Adapter [ADP1] (on-line) [ 31.208000] No dock devices found. [ 31.248000] input: Power Button (FF) as /class/input/input7 [ 31.252000] ACPI: Power Button (FF) [PWRF] [ 31.280000] input: Lid Switch as /class/input/input8 [ 31.284000] ACPI: Lid Switch [LID0] [ 31.316000] input: Sleep Button (CM) as /class/input/input9 [ 31.320000] ACPI: Sleep Button (CM) [SLPB] [ 31.348000] input: Power Button (CM) as /class/input/input10 [ 31.352000] ACPI: Power Button (CM) [PWRB] [ 31.416000] Using specific hotkey driver [ 31.440000] ibm_acpi: ec object not found [ 31.484000] ACPI: Battery Slot [BAT1] (battery present) [ 31.572000] pcc_acpi: loading... [ 31.800000] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MT-37 processors (version 2.00.00) [ 31.800000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa [ 31.800000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc [ 31.800000] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0xe [ 31.800000] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x16 [ 35.860000] eth0: no IPv6 routers present [ 36.116000] ppdev: user-space parallel port driver [ 36.860000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 36.860000] apm: overridden by ACPI. [ 37.548000] Bluetooth: Core ver 2.11 [ 37.548000] NET: Registered protocol family 31 [ 37.548000] Bluetooth: HCI device and connection manager initialized [ 37.548000] Bluetooth: HCI socket layer initialized [ 37.596000] Bluetooth: L2CAP ver 2.8 [ 37.596000] Bluetooth: L2CAP socket layer initialized [ 37.636000] Bluetooth: RFCOMM socket layer initialized [ 37.636000] Bluetooth: RFCOMM TTY layer initialized [ 37.636000] Bluetooth: RFCOMM ver 1.8 [ 39.760000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 39.772000] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes. [ 39.772000] [fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0 [ 39.804000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 41.792000] [fglrx] total GART = 130023424 [ 41.792000] [fglrx] free GART = 114032640 [ 41.792000] [fglrx] max single GART = 114032640 [ 41.792000] [fglrx] total LFB = 268304384 [ 41.792000] [fglrx] free LFB = 253915136 [ 41.792000] [fglrx] max single LFB = 253915136 [ 41.792000] [fglrx] total Inv = 0 [ 41.792000] [fglrx] free Inv = 0 [ 41.792000] [fglrx] max single Inv = 0 [ 41.792000] [fglrx] total TIM = 0 [ 73.440000] hda-intel: Invalid position buffer, using LPIB read method instead. [ 2910.144000] usb 1-1: reset low speed USB device using ohci_hcd and address 3 [ 4434.424000] usb 1-1: reset low speed USB device using ohci_hcd and address 3 [ 4440.888000] usb 1-1: reset low speed USB device using ohci_hcd and address 3 [ 4680.048000] cramfs: wrong magic [ 4680.052000] VFS: Can't find ext3 filesystem on dev sda. [ 4680.056000] FAT: invalid media value (0x01) [ 4680.056000] VFS: Can't find a valid FAT filesystem on dev sda. [ 9842.600000] usb 1-1: USB disconnect, address 3 [ 9843.284000] usb 1-1: new low speed USB device using ohci_hcd and address 4 [ 9843.492000] usb 1-1: configuration #1 chosen from 1 choice [ 9843.500000] input: Acrox USB & PS/2 Mouse as /class/input/input11 [ 9843.500000] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:13.0-1 [14023.540000] usb 1-1: USB disconnect, address 4 [14024.232000] usb 1-1: new low speed USB device using ohci_hcd and address 5 [14024.440000] usb 1-1: configuration #1 chosen from 1 choice [14024.448000] input: Acrox USB & PS/2 Mouse as /class/input/input12 [14024.448000] input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:13.0-1 [18710.608000] usb 1-1: reset low speed USB device using ohci_hcd and address 5 johnnys@narcis:~$